NSN 3130-00-108-0681 · NIIN 001080681 · FSC 3130
NO DASHES 3130001080681
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| MATT | MATERIAL | SEAL STEEL AND WOOL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.5000 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON CAST |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 4.7500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.3750 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 6.5000 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 1.8750 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| ABJH | TEMP RATING | FAHRENHEIT 275.0 |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.5625 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.8125 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.1250 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.5625 |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.6875 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
Supersedes
This item replaces cancelled NIINs 004016843 · 004635785 · 008327841. An older drawing citing one of those numbers resolves here.