NSN 5305-00-207-2095 · NIIN 002072095 · FSC 5305
NO DASHES 5305002072095
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 69000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MAXIMUM 100.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 55000 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.125 AND INCHES MAXIMUM 1.313 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.500 |
| AASK | HEAD STYLE | |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY HEAD HOLE CONFIGURATION |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.612 AND INCHES MAXIMUM 0.625 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ASXK | HOLE QUANTITY | 1 |
| MATT | MATERIAL | OVERALL STEEL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRHC | HOLE CONFIGURATION STYLE | |
| BQDM | HOLE TYPE | DRILLED |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.272 AND INCHES MAXIMUM 0.291 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 2 |
Supersedes
This item replaces cancelled NIIN 006384827. An older drawing citing one of those numbers resolves here.