NSN 5315-01-513-1994 · NIIN 015131994 · FSC 5315
NO DASHES 5315015131994
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Application: TF33P3/103 ENG
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.162 AND INCHES MAXIMUM 0.164 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.905 |
| AGAV | END ITEM IDENTIFICATION | TF33P3/103 ENG |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.030 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.1825 AND INCHES MAXIMUM 0.1845 |
| CRDY | FIRST END LOCATION | GRIP |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 40.0 AND DEGREES MAXIMUM 50.0 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 1.610 AND INCHES MAXIMUM 1.630 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,SHOULDER |
| FEAT | SPECIAL FEATURES | 0.065 IN. HOLE DRILLED THROUGH LONG END 0.070 IN. IN |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5613 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2406 |
| STYL | STYLE DESIGNATOR |