NSN 5340-01-120-9484 · NIIN 011209484 · FSC 5340
NO DASHES 5340011209484
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND OIL RESISTANT AND WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.054 |
| AXWJ | FASTENING DEVICE TYPE | LOCK TAB |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.970 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.265 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.985 AND INCHES MAXIMUM 1.015 |
| FEAT | SPECIAL FEATURES | CUSHIONCOLOR BLACK WITH BLUE IDENTIFIER. |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 010460019. An older drawing citing one of those numbers resolves here.