NSN 2520-00-395-3066 · NIIN 003953066 · FSC 2520
NO DASHES 2520003953066
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMQF | SECOND END TYPE | SPLINED |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 1.000 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 AND TAPERED HOLE 8 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.870 AND INCHES MAXIMUM 1.875 |
| AMQA | FIRST END TYPE | FLANGED |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.690 AND INCHES MAXIMUM 1.700 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.368 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 39.500 AND INCHES MAXIMUM 39.562 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 0.750 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 6.185 AND INCHES MAXIMUM 6.189 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.969 |
| BNYW | FLANGE HOLE TAPER | INCHES NOMINAL PER FOOT 6.000 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.500 |
| MATT | MATERIAL | STEEL |