NSN 5990-00-356-8911 · NIIN 003568911 · FSC 5990
NO DASHES 5990003568911
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 900.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.5340 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6780 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 33.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 500.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 7.30 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 7.50 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 3000.000 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 3410.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2930 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 10 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 31.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0500 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 725.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |