NSN 5955-00-063-9193 · NIIN 000639193 · FSC 5955
NO DASHES 5955000639193
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MAXIMUM 0.1 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.010 TO 0.010 AND -0.015 TO 0.015 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.754 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.228 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.506 AND INCHES MAXIMUM 1.526 |
| ADUM | OVERALL THICKNESS | INCHES MINIMUM 0.333 AND INCHES MAXIMUM 0.353 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 19.5 AND MAXIMUM 20.5 |
| AEHG | SPECIFIED FREQUENCY | KILOHERTZ 16.000 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 70.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13190-120372 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 200000.0 |