NSN 6105-01-700-5532 · NIIN 017005532 · FSC 6105
NO DASHES 6105017005532
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Application: ELECTRIC MOTOR
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CQRR | TAPER | SECOND END PER FOOT IN INCHES 1.25 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 5.61 |
| FEAT | SPECIAL FEATURES | STATOR WINDING DATA: 4 POLES; TYPE OF CONNECTION: TWO CIRCUIT DELTA; 60 SLOT; 60 COILS; D WIRE SIZE: 4 AWG; DUTY: VARIABLE CONTINUOUS, REVERSIBLE, INVERTER DUTY; OPERATING AMBIENT TEPERATURE: -30 DEG C TO +50 DEG C; MOUNTING: HORIZONTAL, FOOT-MOUNTED, NEMA D-FLANGE MOUNT; HOUSING MATERIAL: DUCTILE OR CAT IRON |
| CNMM | FRAME SIZE DESIGNATION | 364 TDZ |
| FAAZ | PHASE | OUTPUT THREE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | OUTPUT LINE TO LINE SINGLE 440.0 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AGAV | END ITEM IDENTIFICATION | ELECTRIC MOTOR |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AAJD | THREAD CLASS | 3A |
| AAJT | OVERALL HEIGHT | INCHES 22.18 |
| AAJU | OVERALL LENGTH | INCHES 41.03 |
| AAJV | OVERALL WIDTH | INCHES 19.75 |
| ABRR | KEYWAY WIDTH | FIRST END INCHES MINIMUM 0.499 AND INCHES MAXIMUM 0.501 |
| ABRR | KEYWAY WIDTH | SECOND END INCHES NOMINAL 0.625 AND INCHES MAXIMUM 0.377 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 6.210 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 40.0 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.767 |
| BCNB | SECOND KEYWAY LENGTH | SINGLE END INCHES NOMINAL 8.55 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MOTOR, ALTERNATING CURRENT |
| ABWV | SHAFT DIAMETER | FIRST END INCHES MINIMUM 1.703 AND INCHES MAXIMUM 1.718 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES MINIMUM 2.766 AND INCHES MAXIMUM 2.781 |
| AFYS | KEYWAY LENGTH | FIRST END INCHES NOMINAL 4.00 |
| AFYS | KEYWAY LENGTH | SECOND END INCHES NOMINAL 2.50 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 14.00 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | FIRST END INCHES 9.06 |
| CWFX | ROTOR SPEED RATING IN RPM | HIGH FULL LOAD 1800.0 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS RUNNING 110.0 |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| BYDT | BEARING TYPE | ANNULAR BALL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND THERMAL PROTECTIVE DEVICE |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AXGY | MOUNTING METHOD | FLANGE |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 50.7 |
| BFMF | COOLING METHOD | NONVENTILATED |