NSN 5910-00-838-8490 · NIIN 008388490 · FSC 5910
NO DASHES 5910008388490
In Stock
CAPACITOR,FIXED,METALLIZED,PAPER
Capacitors
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.188 |
| AAQL | BODY STYLE | |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.000 |
| ABJT | TERMINAL LENGTH | INCHES MAXIMUM 0.750 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 600.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 10.00 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-18312 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHM-MICROFARADS 40.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 2.200 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-18312 TO 4 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHM-MICROFARADS 2000.0 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.875 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 1.062 |
| ADAT | BODY WIDTH | INCHES NOMINAL 2.000 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED MOUNTING HOLES 2 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 2.375 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
Supersedes
This item replaces cancelled NIIN 007026200. An older drawing citing one of those numbers resolves here.