NSN 5315-00-200-2868 · NIIN 002002868 · FSC 5315
NO DASHES 5315002002868
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| ABPE | UNDERCUT RADIUS | INCHES MINIMUM 0.021 AND INCHES MAXIMUM 0.041 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.006 AND INCHES MAXIMUM 0.026 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| ABMZ | DIAMETER | INCHES MINIMUM 0.2500 AND INCHES MAXIMUM 0.2505 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 1.115 AND INCHES MAXIMUM 1.135 |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 15-N MINIMUM 66.0 AND ROCKWELL SUPERFICIAL 15-N MAXIMUM 69.0 |
| AAGZ | FIRST END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.271 AND INCHES MAXIMUM 1.291 |
| MATT | MATERIAL | OVERALL STEEL |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.2000 AND INCHES MAXIMUM 0.2070 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.032 AND INCHES MAXIMUM 0.034 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.032 AND INCHES MAXIMUM 0.034 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 003543340. An older drawing citing one of those numbers resolves here.