NSN 3020-00-274-2918 · NIIN 002742918 · FSC 3020
NO DASHES 3020002742918
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.187 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 38.0 |
| AAQL | BODY STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.625 |
| MATT | MATERIAL | OVERALL STEEL COMP 3135 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.830 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.219 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.156 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.562 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.405 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.938 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.438 |
| FEAT | SPECIAL FEATURES | TWO HOLES 0.250-20 THD SIZE 0.500 IN. DEEP 90.0 DEG FROM KEYWAY 1.000 IN. DIA BOLT CIRCLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.6660 |
| AJLA | TEETH QUANTITY | 20 |
| STYL | STYLE DESIGNATOR |