NSN 3110-00-406-3418 · NIIN 004063418 · FSC 3110
NO DASHES 3110004063418
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL |
| ABXV | BORE DIAMETER | INCHES MINIMUM 4.7492 AND INCHES MAXIMUM 4.7500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| AGZC | LOAD DIRECTION | RADIAL |
| MATT | MATERIAL | BALL STEEL COMP 5140 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| LBMA | LUBRICATION MATERIAL | LUBRICANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.8700 AND INCHES MAXIMUM 0.8750 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 19207-8350525 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 6.4980 AND INCHES MAXIMUM 6.4990 |
| AGYE | SURFACE FINISH | GROUND |
| AGZD | BORE SHAPE | STRAIGHT |
Supersedes
This item replaces cancelled NIIN 001091570. An older drawing citing one of those numbers resolves here.