NSN 3130-01-106-5389 · NIIN 011065389 · FSC 3130
NO DASHES 3130011065389
In Stock
HOUSING,BEARING UNIT
Bearings, Mounted
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 2.868 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.2510 AND INCHES MAXIMUM 0.2580 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 2.1020 AND INCHES MAXIMUM 2.1040 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.3750 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 3.3740 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.2140 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 4.1250 |
| AGNF | BASE LENGTH | INCHES NOMINAL 1.7800 |
| ANJS | SHAFT END TYPE | OPEN |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.8700 |
| FEAT | SPECIAL FEATURES | FURN W/4 MOUNTING HOLES,0.193 IN MIN AND 0.196 MAX DIA; PAINT ALL SURFACES NOT MARKED W/ ZINC CHROMATE PRIMER,TT-P-600 GREEN NO 34151 PER FED STD595 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY A356.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 00268-ECO 77-295 |