NSN 5306-00-292-8278 · NIIN 002928278 · FSC 5306
NO DASHES 5306002928278
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.016 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.453 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.390 AND INCHES MAXIMUM 1.437 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.377 |
| AASK | HEAD STYLE | |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1889 AND INCHES MAXIMUM 0.1894 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ASXK | HOLE QUANTITY | 1 |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Supersedes
This item replaces cancelled NIIN 001562467. An older drawing citing one of those numbers resolves here.