NSN 5340-00-205-6306 · NIIN 002056306 · FSC 5340
NO DASHES 5340002056306
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.031 AND INCHES MAXIMUM 0.041 |
| STYL | STYLE DESIGNATOR | |
| SUPP | SUPPLEMENTARY FEATURES | COLOR BLACK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL---20693,CO- A,TYE 1 OR MFR REF SINGLE MATERIAL RESPONSE ZYTEL 101 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.219 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.576 AND INCHES MAXIMUM 0.592 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.183 AND INCHES MAXIMUM 0.193 |
| CCNF | APPLICATION/FUNCTION | USED AS CABLE CLAMP |
| MATT | MATERIAL | OVERALL PLASTIC POLYHEXAMETHYLENE AMIDE |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION CONTROL 49956-214-1043 AND MANUFACTURERS SPECIFICATION CONTROL 97942-1JA7562 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.373 AND INCHES MAXIMUM 0.388 |
Supersedes
This item replaces cancelled NIIN 006875311. An older drawing citing one of those numbers resolves here.