NSN 3020-00-266-7669 · NIIN 002667669 · FSC 3020
NO DASHES 3020002667669
In Stock
SPROCKET WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BYGF | TOOTH PITCH | INCHES NOMINAL 0.500 |
| BYFR | TEETH HARDNESS RATING | ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 45.0 |
| BYFQ | HARDNESS RATING TEST METHOD | ROCKWELL |
| BYFN | TEETH QUANTITY PER ROW | 20 |
| BYFP | ASA STANDARD CHAIN NUMBER | 40 |
| BYFL | TEETH ROW QUANTITY | 1 |
| ABFF | FURNISHED ITEMS | KEYING FACILITY |
| ABHE | OUTSIDE DIAMETER | INCHES MINIMUM 3.442 AND INCHES MAXIMUM 3.472 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.938 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.253 |
| ABSF | KEY WIDTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.253 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.505 |
| ADGE | BORE LENGTH | INCHES NOMINAL 0.938 |
| AETC | METALLIC HARDNESS RATING | HUB MINIMUM ROCKWELL C 35.0 AND MAXIMUM ROCKWELL C 45.0 |
| AEVF | DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.875 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.196 |
| ALNC | HUB OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 2.625 |
| AQPL | FACE WIDTH | INCHES NOMINAL 0.284 |
| ARJD | DESIGN FORM | PLAIN |
| ASBP | BORE TYPE | STRAIGHT |
| ASYR | DISTANCE FROM HUB END TO FLANGE END | AA END INCHES NOMINAL 0.452 |
| ASYR | DISTANCE FROM HUB END TO FLANGE END | BB END INCHES NOMINAL 0.201 |
| BSGK | KEYING FACILITY TYPE | KEYWAY |
| FEAT | SPECIAL FEATURES | 0.062 IN. DEEP BY 45 DEG ANGLE CHAMFER ON BORE END ON 1ST END OF HUB,0.125 IN. DIA HOLE DRILLED ON A 8 DEG ANGLE FROMBASE OF TEETH @INTO BORE ON 2ND END OF HUB |
| MATT | MATERIAL | STEEL COMP 1020 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 1020 |
| NMBR | QUANTITY | 1 |
| STYL | STYLE DESIGNATOR |