NSN 5905-00-535-9364 · NIIN 005359364 · FSC 5905
NO DASHES 5905005359364
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXGY | MOUNTING METHOD | SLOT |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 41.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFT | LONGITUDINAL ACTUATOR TRAVEL | INCHES NOMINAL 2.850 |
| AEFW | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | INCHES NOMINAL 2.850 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.875 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 20.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 88277-8524695 |
| TTQY | TERMINAL TYPE AND QUANTITY | CONNECTOR, RECEPTACLE 1 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 71.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.218 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.561 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 4.062 |
| AGQL | UNDERCUT LENGTH | INCHES NOMINAL 0.155 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 1.750 |
| AEDQ | UNDERCUT DIAMETER | INCHES NOMINAL 0.126 |
| AEDX | SHAFT STYLE | |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.25 |