NSN 3020-00-528-7140 · NIIN 005287140 · FSC 3020
NO DASHES 3020005287140
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.000 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 39.6452 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.297 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.158 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.595 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.750 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.875 |
| MATT | MATERIAL | OVERALL IRON MALLEABLE |
| STYL | STYLE DESIGNATOR | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.128 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.047 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.9350 |
| AJLA | TEETH QUANTITY | 38 |
| ANTP | BORE STYLE | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.047 |
Supersedes
This item replaces cancelled NIINs 003162405 · 003838689. An older drawing citing one of those numbers resolves here.