NSN 5340-01-210-3202 · NIIN 012103202 · FSC 5340
NO DASHES 5340012103202
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | THREADED |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.750 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.340 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.000 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES NOMINAL 0.230 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.490 |
| AHLZ | SECOND LEG SLOT LENGTH | INCHES NOMINAL 0.980 |
| AHMA | SECOND LEG SLOT WIDTH | INCHES NOMINAL 0.280 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.125 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.125 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.000 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.380 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | SLOT ON SECOND LEG CUT THROUGH TO END |
| MATT | MATERIAL | STEEL COMP 316L |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-766 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 012122632. An older drawing citing one of those numbers resolves here.