NSN 1680-00-580-9389 · NIIN 005809389 · FSC 1680
NO DASHES 1680005809389
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Aircraft Accessories and Components
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| CFRW | END OVERALL DIAMETER | BOTH ENDS INCHES NOMINAL 0.875 |
| AAUJ | SPLINE MAJOR DIAMETER | BOTH ENDS INCHES NOMINAL 0.3326 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 46.3125 |
| AEDN | TIP LENGTH | BOTH ENDS INCHES NOMINAL 0.891 |
| AGGZ | SHANK OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 0.500 |
| AGJR | MINOR DIAMETER | SPLINE BOTH ENDS INCHES NOMINAL 0.2715 |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.790 |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.375 |
| MATT | MATERIAL | CASING STEEL |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | DIAMETER BOTH ENDS INCHES NOMINAL 0.468 |
| SFTT | SURFACE TREATMENT | CASING RUBBER CHLOROPRENE CLASS CR |
| ZZZV | FSC APPLICATION DATA | ACFT WING FLAP CONTROL ASSEMBLY |
| ABSA | SPLINE QUANTITY | 14 |
| AECT | THREAD DEPTH | BOTH ENDS INCHES NOMINAL 0.328 |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| CFRM | TORSIONAL DEFLECTION RATING | 100 DEG AT 100 LB IN. MAX TORSIONAL DEFLECTION RATING IN WINDING DIRECTION,148 DEG AT 60 LB IN UNWINDING DIRECTION |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 44.500 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | BOTH ENDS INCHES NOMINAL 0.469 |
| AXYS | SPLINE TYPE | BOTH ENDS INVOLUTE |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 46.3125 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 10.000 |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | BOTH ENDS ROUND, INTERNAL SPLINED |
| ASDB | WIDTH ACROSS FLATS | BOTH ENDS INCHES NOMINAL 0.875 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | BOTH ENDS UNEF |
| AGJS | PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.2917 |