NSN 5306-00-584-7811 · NIIN 005847811 · FSC 5306
NO DASHES 5306005847811
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.106 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 3.422 AND INCHES MAXIMUM 3.454 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.070 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4986 AND INCHES MAXIMUM 0.4991 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.828 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 4.203 AND INCHES MAXIMUM 4.250 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.265 AND INCHES MAXIMUM 0.297 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.752 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 4.047 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 4037 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6050 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6758 OR ASSN STD 6TH MATERIAL RESPONSE A-S 6300 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
Supersedes
This item replaces cancelled NIIN 001511786. An older drawing citing one of those numbers resolves here.