NSN 3020-00-245-7619 · NIIN 002457619 · FSC 3020
NO DASHES 3020002457619
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 32.0 |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR | |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.062 |
| AJLA | TEETH QUANTITY | 32 |
| ANTP | BORE STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0000 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.188 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.313 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.250 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 416 COND H |