NSN 5990-00-929-3216 · NIIN 009293216 · FSC 5990
NO DASHES 5990009293216
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJSL | BODY SIZE | 8 |
| AAQL | BODY STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.6310 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.3120 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 25.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 70.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0460 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6150 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.7500 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1120 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8750 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | REAR |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |