NSN 5905-01-259-5423 · NIIN 012595423 · FSC 5905
NO DASHES 5905012595423
In Stock
RESISTOR NETWORK,FIXED,FILM
Resistor
Application: HARM MISSLE ASSEMBLY
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| AAPP | ELECTRICAL RESISTANCE | SEVENTH INTERMEDIATE RESISTANCE VALUE KILOHMS 35.211 |
| AAPP | ELECTRICAL RESISTANCE | ELEVENTH INTERMEDIATE RESISTANCE VALUE KILOHMS 757.580 |
| AAPP | ELECTRICAL RESISTANCE | SIXTH INTERMEDIATE RESISTANCE VALUE KILOHMS 33.670 |
| AAPP | ELECTRICAL RESISTANCE | FIFTH INTERMEDIATE RESISTANCE VALUE KILOHMS 31.646 |
| AAPP | ELECTRICAL RESISTANCE | HIGHEST RESISTANCE VALUE MEGOHMS 1.23457 |
| AAPP | ELECTRICAL RESISTANCE | TENTH INTERMEDIATE RESISTANCE VALUE KILOHMS 41.152 |
| AAPP | ELECTRICAL RESISTANCE | SECOND INTERMEDIATE RESISTANCE VALUE KILOHMS 28.409 |
| AAPP | ELECTRICAL RESISTANCE | LOWEST RESISTANCE VALUE KILOHMS 1.000 |
| AAPP | ELECTRICAL RESISTANCE | FOURTH INTERMEDIATE RESISTANCE VALUE KILOHMS 30.488 |
| AAPP | ELECTRICAL RESISTANCE | THIRD INTERMEDIATE RESISTANCE VALUE KILOHMS 29.412 |
| AAPP | ELECTRICAL RESISTANCE | NINTH INTERMEDIATE RESISTANCE VALUE KILOHMS 38.911 |
| AAPP | ELECTRICAL RESISTANCE | FIRST INTERMEDIATE RESISTANCE VALUE KILOHMS 27.473 |
| AAPP | ELECTRICAL RESISTANCE | EIGHTH INTERMEDIATE RESISTANCE VALUE KILOHMS 37.037 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARA | TERMINAL QUANTITY | 16 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.135 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.725 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.300 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.150 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AEFB | POWER DISSIPATION RATING IN WATTS | LOCATION NOT OTHERWISE SPECIFIED EACH RESISTOR 0.050 |
| AFWW | TERMINAL WIDTH | INCHES NOMINAL 0.019 |
| AGAV | END ITEM IDENTIFICATION | HARM MISSLE ASSEMBLY |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.033 |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| PKWT | UNPACKAGED UNIT WEIGHT | GRAMS 2.5 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 30003-704AS9457 |