NSN 5962-01-518-3733 · NIIN 015183733 · FSC 5962
NO DASHES 5962015183733
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Application: C-17A AIRCRAFT
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.197 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.157 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.054 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 85.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 125.0 |
| AGAV | END ITEM IDENTIFICATION | C-17A AIRCRAFT |
| CBBL | FEATURES PROVIDED | LOW NOISE AND ELECTROSTATIC SENSITIVE AND HIGH STABILITY AND SELECTED ITEM |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CRTL | CRITICALITY CODE JUSTIFICATION | CBBL |
| CSSL | DESIGN FUNCTION AND QUANTITY | REFERENCE, VOLTAGE, ANALOG 1 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | JOINT ELECTRON DEVICE ENGINEERING COUNCIL -S012-8A |
| CTQX | CURRENT RATING PER CHARACTERISTIC | MILLIAMPERES MAXIMUM SUPPLY 3.00 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MICROCIRCUIT, PLASTIC ENCAPSULATED (SURFACE MOUNT) - PROCUREMENT AND SELECTION REQUIREMENTS (FOR VOLTAGE REF) |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MINIMUM ABSOLUTE INPUT -0.3 AND VOLTS MAXIMUM ABSOLUTE INPUT 40.0 AND VOLTS NOMINAL OUTPUT 2.5 AND VOLTS MINIMUM INPUT 8.0 AND VOLTS MAXIMUM INPUT 36.0 |
| CZEQ | TIME RATING PER CHACTERISTIC | MICROSECONDS NOMINAL SETTLING 5.00 |
| FEAT | SPECIAL FEATURES | 1 PPM/DEGREE C, LOW NOISE, +2.5 V VOLTAGE REFERENCE W/ EXTERNALTRIM INPUT THAT ALLOWS POM 1 PERCENT OUTPUT VOLTAGE ADJUSTMENT. |
| SPCL | SPECIAL TEST FEATURES | MAXIM P/N MAX6325ESA IS UPSCREENED PER PARA.3.1.1 OF DWG 89954/356A1407 BY APPROVED TEST FACILITY, PIKES PEAK TEST LABS, INC, COLOROADO SPRINGS, CO FOR OPERATION IN TEMPERATURES OF -55C TO +125C. |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 89959-356A1407 |
| TTQY | TERMINAL TYPE AND QUANTITY | GULLWING 8 |