NSN 4720-00-990-4277 · NIIN 009904277 · FSC 4720
NO DASHES 4720009904277
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.969 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END NPTF |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL PIPE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 14000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.500 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.500 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R2,TYE A-81343 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 13.000 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 7000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3500.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED COTTON CORD |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| AHNC | CONNECTION STYLE | |
| CQRB | SEAT ANGLE | FIRST END DEGREES 30.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.000 |