NSN 5990-00-813-5084 · NIIN 008135084 · FSC 5990
NO DASHES 5990008135084
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSL | BODY SIZE | 8 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0350 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0570 |
| AAQL | BODY STYLE | |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1197 AND INCHES MAXIMUM 0.1200 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 21.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 13.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 36.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 24.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.127 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4100 AND INCHES MAXIMUM 0.4300 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 38.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 28.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 47.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 11.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.3700 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 122.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0350 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4845 AND INCHES MAXIMUM 0.4850 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.9800 AND INCHES MAXIMUM 2.0000 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.7000 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 96.0 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 144.00 |