NSN 5305-00-576-2328 · NIIN 005762328 · FSC 5305
NO DASHES 5305005762328
In Stock
SCREW,ASSEMBLED WASHER
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.232 |
| AASK | HEAD STYLE | |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | INCHES MINIMUM 0.020 |
| MATT | MATERIAL | FASTENER STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416 TY 1 CL 3 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325 TY 1 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CTHW | PRIMARY WASHER STYLE | |
| CQFM | HARDNESS RATING | PRIMARY WASHER ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 50.0 |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | INCHES MINIMUM 0.327 AND INCHES MAXIMUM 0.338 |
| AAJD | THREAD CLASS | 2A |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.102 AND INCHES MAXIMUM 0.113 |
| AAVW | WASHER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Supersedes
This item replaces cancelled NIIN 002829833. An older drawing citing one of those numbers resolves here.