NSN 5990-00-067-6545 · NIIN 000676545 · FSC 5990
NO DASHES 5990000676545
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1197 AND INCHES MAXIMUM 1.0000 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0350 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4610 AND INCHES MAXIMUM 0.4850 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1300 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 6.12 AND MAXIMUM 7.48 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 2.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0005 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0350 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0010 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7950 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 0.1 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MINIMUM 33.3 AND MILLIAMPERES MAXIMUM 40.7 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 800.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 328.50 AND MAXIMUM 401.50 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 7.470 AND ROTOR TO STATOR MAXIMUM 9.130 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| CWMS | MOUNTING THREAD TOLERANCE CLASS | INTERNAL 2B |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.4610 AND INCHES MAXIMUM 2.4850 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9992 AND INCHES MAXIMUM 1.0000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2050 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.0670 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |