NSN 5990-00-702-7638 · NIIN 007027638 · FSC 5990
NO DASHES 5990007027638
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 900.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 20.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 37.60 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 30.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 30.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0015 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0020 |
| AAQL | BODY STYLE | |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 55.0 |
| AJWQ | PILOT LENGTH | INCHES MAXIMUM 0.1920 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.6500 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | SIDE |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 725.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 123.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 3.0 |
| FEAT | SPECIAL FEATURES | PROVIDED WITH 24 VDC CLUTCH |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.3380 |
| AJSL | BODY SIZE | 10 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0630 |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 0.8430 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.1800 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 0.9520 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8123 |