NSN 3416-01-383-3821 · NIIN 013833821 · FSC 3416
NO DASHES 3416013833821
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 30.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 TAPER ATTACHMENT; 1 COLLANT ASSEMBLY; 1 SPLASH GUARD, FULL LENGTH; 1 CHIP GUARD; 1 CHUCK GUARD; 1 CHUCK, 3 JAW, BACK PLATE MOUNTING; 1 AUTOMATIC CARRIAGE FEED STOP; 1 DIGITAL READOUT, 2 AXIS; 1 DRAIN ASSEMBLY FOR COOLANT; 1 SOUTH BEND LATHE NAME PLATE; 1 NAME PLATE; 1 LUBRICATION CHART |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 0.300 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 40.0 TO 2500.0 |
| BTTD | RATED SWING | INCHES NOMINAL 13.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 13.000 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 8.250 |
| BTWB | THREAD CHANGE QUANTITY | 54 |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| BTYN | HOLLOW SPINDLE HOLE SIZE | INCHES NOMINAL 1.500 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.500 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND OR POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND OR POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 39 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 56.0 |
| ELEC | VOLTAGE IN VOLTS | 230.0 AND 460.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | DIAMETER OF TAILSTOCK SPINDLE 1 5/8 IN.; TAILSTOCK SPINDLE TRAVEL 4 3/8 IN.; TAILSTOCK SPINDLE CENTER |
| FREQ | FREQUENCY IN HERTZ | 60.0 |