NSN 3040-00-585-3505 · NIIN 005853505 · FSC 3040
NO DASHES 3040005853505
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
47 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 4.862 |
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 3.448 |
| CFFM | SHAFT HARDNESS RATING | CALE 24 |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 8.000 |
| CFFF | WORM PRESSURE ANGLE IN DEG | 20.000 |
| CFFG | WORM HELIX ANGLE | 7 DEG 42 MIN |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 1.625 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | EITHER END EIGHTH PORTION INCHES NOMINAL 0.688 |
| AASA | THREAD LENGTH | EITHER END THIRD PORTION INCHES NOMINAL 0.688 |
| BDGL | DISTANCE FROM RADIAL CENTER TO FLAT SURFACE | EITHER END FIFTH PORTION INCHES NOMINAL 1.000 |
| BYFR | TEETH HARDNESS RATING | ROCKWELL C MINIMUM 56.0 AND ROCKWELL C MAXIMUM 62.0 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | EITHER END ELEVENTH PORTION INCHES MINIMUM 0.4940 AND INCHES MAXIMUM 0.4960 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | EITHER END SECOND PORTION INCHES NOMINAL 0.3130 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | EITHER END SEVENTH PORTION INCHES NOMINAL 0.3130 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | EITHER END ELEVENTH PORTION INCHES NOMINAL 0.265 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | EITHER END SECOND PORTION INCHES NOMINAL 0.125 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | EITHER END SEVENTH PORTION INCHES NOMINAL 0.125 |
| CFQQ | SHAFT SECTION SIZE | 1.922 INCHESOVERALL DIA EITHER END EITHER END |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 8.000 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | EITHER END ELEVENTH PORTION INCHES NOMINAL 7.125 |
| CFFX | STRAIGHT UNTHREADED LENGTH | EITHER END FIRST PORTION INCHES NOMINAL 2.625 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 30.125 |
| ABRR | KEYWAY WIDTH | EITHER END EIGHTH PORTION INCHES NOMINAL 0.313 |
| ABRR | KEYWAY WIDTH | EITHER END THIRD PORTION INCHES NOMINAL 0.313 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | EITHER END EIGHTH PORTION SPECIAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | EITHER END THIRD PORTION SPECIAL |
| AKAF | SHAFT THREAD DIRECTION | EITHER END EIGHTH PORTION RIGHT-HAND |
| AKAF | SHAFT THREAD DIRECTION | EITHER END THIRD PORTION RIGHT-HAND |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | EITHER END SEVENTH PORTION INCHES MINIMUM 2.651 AND INCHES MAXIMUM 2.656 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | EITHER END SIXTH PORTION INCHES NOMINAL 2.625 |
| CFQR | CIRCULAR PORTION RADIUS | EITHER END FIFTH PORTION INCHES NOMINAL 1.688 |
| MATT | MATERIAL | STEEL COMP 4620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7493,CO-4620 |
| ZZZV | FSC APPLICATION DATA | STEAM TURBINE |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | EITHER END NINTH PORTION INCHES MINIMUM 1.999 AND INCHES MAXIMUM 1.001 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | EITHER END SECOND PORTION INCHES MINIMUM 2.5588 AND INCHES MAXIMUM 2.5594 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | EITHER END FOURTH PORTION INCHES MINIMUM 1.999 AND INCHES MAXIMUM 2.001 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | EITHER END FIRST PORTION INCHES NOMINAL 0.750 |
| CFFX | STRAIGHT UNTHREADED LENGTH | EITHER END FOURTH PORTION INCHES NOMINAL 0.250 |
| CFFX | STRAIGHT UNTHREADED LENGTH | EITHER END SECOND PORTION INCHES NOMINAL 2.875 |
| CFFX | STRAIGHT UNTHREADED LENGTH | EITHER END SEVENTH PORTION INCHES NOMINAL 1.063 |
| CFFX | STRAIGHT UNTHREADED LENGTH | EITHER END SIXTH PORTION INCHES NOMINAL 2.438 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | EITHER END ELEVENTH PORTION INCHES MINIMUM 1.874 AND INCHES MAXIMUM 1.875 |