NSN 5905-00-729-8040 · NIIN 007298040 · FSC 5905
NO DASHES 5905007298040
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BYDT | BEARING TYPE | SHAFT BALL |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.73400 AND INCHES MAXIMUM 1.76600 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.08800 AND INCHES MAXIMUM 0.09800 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 60.0 |
| FEAT | SPECIAL FEATURES | 15.0 DEG MECHANICAL OVERTRAVEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.000 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.980 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.07300 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.56100 AND INCHES MAXIMUM 1.56200 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 320.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.50 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.20 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | SERVO MOUNT |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.25 TO 0.25 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 90.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 50 DB LOG. |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.561 AND INCHES MAXIMUM 1.562 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.734 AND INCHES MAXIMUM 1.766 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.730 |