NSN 5990-00-679-4358 · NIIN 006794358 · FSC 5990
NO DASHES 5990006794358
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0590 |
| AAQL | BODY STYLE | |
| AJSL | BODY SIZE | 12 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3000 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.1000 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0590 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0900 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.9340 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6400 |
| CQTM | TERMINAL LOCATION | REAR |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
Supersedes
This item replaces cancelled NIIN 007381478. An older drawing citing one of those numbers resolves here.