NSN 5306-01-043-0549 · NIIN 010430549 · FSC 5306
NO DASHES 5306010430549
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.497 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.731 AND INCHES MAXIMUM 1.778 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.220 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.111 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.501 AND INCHES MAXIMUM 1.533 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 85495-B-17020 |