NSN 5990-00-943-0316 · NIIN 009430316 · FSC 5990
NO DASHES 5990009430316
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.8300 AND INCHES MAXIMUM 1.8800 |
| CQTM | TERMINAL LOCATION | SIDE |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| AAQL | BODY STYLE | |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1245 AND INCHES MAXIMUM 0.1247 |
| ABWV | SHAFT DIAMETER | REAR SHAFT INCHES MINIMUM 0.0933 AND INCHES MAXIMUM 0.0935 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.7500 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 6.00 |
| FEAT | SPECIAL FEATURES | REAR SHAFT DIM. 0.2090 IN. MAX LG,0.0933 IN. MIN,0.0935 IN. MAX DIA |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 89954-926C327 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0005 AND INCHES MAXIMUM 0.0015 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.4000 AND INCHES MAXIMUM 0.4300 |
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES MAXIMUM 0.2090 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJSL | BODY SIZE | 8 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| CRSJ | SHAFT TYPE | BOTH SHAFTS ROUND |