NSN 9330-01-501-5767 · NIIN 015015767 · FSC 9330
NO DASHES 9330015015767
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 13.800 |
| ABNM | THICKNESS | INCHES NOMINAL 2.000 |
| ABRY | LENGTH | INCHES NOMINAL 23.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULARLY SHAPED WITH 2 NOTCHES 1.25X1.00 ON RIGHT SHORT END 1.70 FROM EITHER LONG END; HAS 2 CROSSWISE GROOVES 1.12DX1.0W, 6.16 INCH FROM LEFT EDGE AND 8.20 INCH FROM RIGHT EDGE; MARK ON NEAR SIDE: WORDS "UP" AND "FWD" CENTERED ON 2 LINES NEAR CENTER TOP AND P/N CENTERED NEAR CENTER BOTTOM |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMSR-87-100 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-831 | 3J310 |