NSN 9330-01-501-6394 · NIIN 015016394 · FSC 9330
NO DASHES 9330015016394
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.750 |
| ABNM | THICKNESS | INCHES NOMINAL 2.500 |
| ABRY | LENGTH | INCHES NOMINAL 23.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULARWITH 3 CUTOUTS ON RIGHT SHORT EDGE: 1.25WX1.18H, 2.12 IN. UP FROM BOTTOM, 1.25WX1.00H, 5.96 UP FROM BOTTOM AND 1.25WX1.76H, 13.96 UP FROM BOTTOM; A GROOVE 1.86DX2.03W ON FAR SIDE TOP LENGTHWISE EDGE; A GROOVE1.7DX2.12W ON FAR SIDE BOTTOM LENGTHWISE EDGE; A TRAPEZOIDAL CUTOUT ON NEAR SIDE BELOW TOP GROOVE, DEEPER ON RIGHT SIDE; MARKINGS ON FAR SIDE; "UP"P AND"AFT" ON 2 LINES NEAR TOP GROOVE AND UN-NOTCHED EDGE AND PARTNUMBER ON FAR SIDE IN LOWER GROOVE NEAR NOTCHED EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMSR-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-817 | 26512 |
| 160D950827-817 | 3J310 |
| 160D950827-817 | 79RG9 |