NSN 9330-01-501-6438 · NIIN 015016438 · FSC 9330
NO DASHES 9330015016438
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 18.400 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 23.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH CUTOUTS ON RIGHT/SHORT EDGE: 1.25WX1.52H, 2.0 INCHES FROM BOTTOM AND 1.25WX1.76H, 14.4 INCHES FROM BOTTOM; A CIRCULAR HOLE WITH 3.50 IN. DIAM CUT THRU, CENTERED 11.56 UP FROM BOTTOM AND 10.31 FROM LEFT EDGE; ON NEAR SIDE: A GROOVE 2.52WX0.60D ALONG TOP EDGE AND A GROOVE 2.00WX0.56D ALONG LOWER EDGE; ON FAR SIDE: A GROOVE 1.76WX0.72D ALONG TOP EDGE AND A GROOVE 2.36WX0.86D ALONG BOTTOM EDGE, MARKINGS "UP" AND "AFT" ON 2 LINES BELOW TOP GROOVE AND NEAR UN-NOTCHED EDGE, PART NUMBER IN LOWER GROOVE NEAR UN-NOTCHED EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-821 | 26512 |
| 160D950827-821 | 3J310 |
| 160D950827-821 | 79RG9 |