NSN 9330-01-501-6449 · NIIN 015016449 · FSC 9330
NO DASHES 9330015016449
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.440 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 19.400 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR; FAR SIDE BOTTOM/LONG EDGE IS TAPERED DOWN TO 0.36 INCH FROM BOTTOM EDGE; HOLE 3.50 INCH IN DIAMETER CUT THRU IS CENTERED 10.68 INCH UP FROM BOTTOM AND 10.28 OVER FROM LEFT EDGE; FAR SIDE IS MARKED WITH "UP" AND "AFT" ON 2 LINES ON UPPER RIGHT QUADRANT AND WITH PART NUMBER ON LOWER RIGHT QUADRANT |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-825 | 26512 |
| 160D950827-825 | 3J310 |
| 160D950827-825 | 79RG9 |