NSN 9330-01-501-7093 · NIIN 015017093 · FSC 9330
NO DASHES 9330015017093
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 15.400 |
| ABNM | THICKNESS | INCHES NOMINAL 2.500 |
| ABRY | LENGTH | INCHES NOMINAL 20.940 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 3 CUTOUTS ON RIGHT/SHORT EDGE: 1.12WX1.44H, 1.44 INCH FROM BOTTOM EDGE, 1.12WX1.06H, 7.50 FROM BOTTOM AND 1.12WX1.40H, 12.04 FROM BOTTOM; A CIRCLE WITH DIAMETER OF 2.50 INCHES IS CUT THRU, CENTERED 3.50 FROM RIGHT EDGE AND 5.20 FROM BOTTOM; NEAR SIDE HAS AN ARC OF A CIRCLE WITH RADIUS OF 7.75 IN. CUT OUT FROM 5.90 INCHES FROM LEFT EDGE TO 13.60 FROM LEFT EDGE WITH A LENGTH OF 6.40 INCHES AND HAS MARKINGS "UP" AND "AFT" ON 2 LINES NEAR UPPER LEFT CORNER AND PART NUMBER NEAR BOTTOM LEFT EDGE; FAR SIDE HAS TAPER ON TOP EDGE OF 0.64 INCH AND HAS 2 CROSSWISE GROOVES 1.10WX1.30D, 6.86 AND 13.60 INCHES FROM NOTCHED EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-711 | 26512 |
| 160D950827-711 | 3J310 |
| 160D950827-711 | 79RG9 |