NSN 9330-01-501-7172 · NIIN 015017172 · FSC 9330
NO DASHES 9330015017172
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 18.160 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 20.940 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON RIGHT/SHORT EDGE: 1.26WX1.60H, 2.12 INCHES FROM BOTTOM AND 3.00WX3.70H AT TOP RIGHT CORNER; TOP EDGE HAS CUTOUT 2.62WX3.70H, 4.10 FROM RIGHT EDGE AND A CUTOUT 1.40WX2.68H AT TOP LEFT CORNER; BOTTOM LEFT CORNER IS CUTOUT 1.40WX2.68D; NEAR SIDE HAS GROOVE 2.40WX0.68D ALONG TOP EDGE AND GROOVE 2.12WX0.68H ALONG BOTTOM EDGE AND CUTOUT 4.14WX6.32HX1.80D AT BOTTOM LEFT CORNER; NEAR SIDE IS MARKED "UP AFT" IN CENTER OF TOP GROOVE AND WITH PART NUMBER JUST ABOVE BOTTOM GROOVE, NEAR CENTER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-721 | 26512 |
| 160D950827-721 | 3J310 |
| 160D950827-721 | 79RG9 |