NSN 9330-01-501-7177 · NIIN 015017177 · FSC 9330
NO DASHES 9330015017177
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.800 |
| ABNM | THICKNESS | INCHES NOMINAL 2.500 |
| ABRY | LENGTH | INCHES NOMINAL 20.940 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON RIGHT/SHORT EDGE: 4.14WX5.60H AT BOTTOM RIGHT CORNER, 2.60WX3.80H AT UPPER RIGHT CORNER; TOP EDGE IS CUTOUT 2.62WX3.80H, 4.10 FROM UPPER LEFT CORNER; NEAR SIDE HAS MARKINGS "UP" AND "AFT" ON 2 LINES NEAR CENTER TOP AND PART NUMBER APPROX. 6.00 FROM BOTTOM, NEAR CENTER; FAR SIDE HAS GROOVE 2.00WX0.60D ALONG BOTTOM EDGE AND ONE 3.60WX 0.60D ALONG TOP EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-723 | 26512 |
| 160D950827-723 | 3J310 |
| 160D950827-723 | 79RG9 |