NSN 9330-01-502-1476 · NIIN 015021476 · FSC 9330
NO DASHES 9330015021476
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 18.180 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 22.320 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON LEFT/SHORT EDGE: 1.00WX1.00H, 2.26 & 15.20 INCHES FROM BOTTOM; CUTOUT 9.00WX7.00H FROM BOTTOM RIGHT CORNER AND ARCHED CUTOUT FROM BOTTOM EDGE, 8.00WX11.00H, 3.00 IN FROM LEFT EDGE; A CROSSWISE HALF-ARCHED CUTOUT FROM RIGHT EDGE, ROUNDED SIDE DOWN, 9.00WX3.90H, 8.50 FROM BOTTOM; AND A CUTOUT ON RIGHT EDGE, 1.00WX1.00H, 2.58 FROM TOP; NEAR SIDE HAS A GROOVE, 2.58WX0.84D ALONG TOP EDGE, AND HAS MARKINGS: "UP" IN TOP GROOVE, AND "AFT" BELOW IT AND PART NUMBER TO RIGHT OF "AFT" |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-419 | 26512 |
| 160D950827-419 | 3J310 |
| 160D950827-419 | 79RG9 |