PLASTIC MATERIAL,CELLULAR

Name: PLASTIC MATERIAL,CELLULAR
Brand: Atlas Air Supply
SKU: 9330015022741
Availability: LimitedAvailability

Plastics Fabricated Materials

Application: AIRCRAFT, THUNDERBOLT II, A-10

Technical characteristics

12 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAAU	FIRE RETARDING CHARACTERISTIC	NOT FIRE RETARDING
ABGL	WIDTH	INCHES NOMINAL 18.200
ABNM	THICKNESS	INCHES NOMINAL 4.000
ABRY	LENGTH	INCHES NOMINAL 23.400
AGAV	END ITEM IDENTIFICATION	AIRCRAFT, THUNDERBOLT II, A-10
BDNZ	DENSITY RATING	POUNDS PER CUBIC FOOT 1.2
CTLY	COMPRESSION STRENGTH AT 25 PCT DEFLECTION	POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	FILLER FOAM
FEAT	SPECIAL FEATURES	RECTANGLE; 2 CUTOUTS ON LEFT/SHORT EDGE: 1.25WX1.54H, 2.00 FROM BOTTOM & 1.25WX2.12H, 2.00 FROM TOP & CUTOUT ON TOP EDGE: 3.80WX2.00H, 2.03 FROM RIGHT; NEAR SIDE IS TAPERED 0.32 AT TOP EDGE AND HAS LENGTHWISE GROOVES: 2.00HX0.60D ALONG BOTTOM EDGE & 2.60WX0.70D ALONG TOP & CROSSWISE GROOVE: 3.80WX3.00H, 2.04 FROM RIGHT EDGE; A NEARLY OVAL CUTOUT WITH RADIUS OF 2.00 CENTERED 13.09 FROM LEFT WITH LOWER ARC CENTERED 8.48 FROM BOTTOM, JUTTING TO LEFT FOR 1.00 INCH 8.48 FROM BOTTOM, THEN UP TO BOTTOM OF NEAR SIDE GROOVE, RIGHT ALONG GROOVE FOR 3.00 IN. THEN DOWN 1.76 TO MEET TOP OF UPPER ARC, CENTERED 11.84 FROM BOTTOM, ENDING WITH RIGHT SIDE OF OVAL; FAR SIDE IS TAPERED 0.20 AT BOTTOM EDGE AND HAS MARKINGS: "UP" & "AFT" BELOW GROOVE IN UPPER LEFT AREA DN PART NUMBER IN UPPER RIGHT AREA (FAR SIDE UP)
MATT	MATERIAL	PLASTIC POLYURETHANE
SFCD	SURFACE CONDITION	ROUGH
SUPP	SUPPLEMENTARY FEATURES	MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100

3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.