NSN 9330-01-502-2988 · NIIN 015022988 · FSC 9330
NO DASHES 9330015022988
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 19.400 |
| ABNM | THICKNESS | INCHES NOMINAL 6.720 |
| ABRY | LENGTH | INCHES NOMINAL 25.710 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | ROUGHLY RECTANGULAR; NEAR SIDE: LEFT/SHORT EDGE TAPERS 1.00 TO BOTTOM, BOTTOM EDGE TAPERS 1.65 TO RIGHT EDGE, RIGHT EDGE TAPERS 1.00 TO TOP, & HAS A CROSSWISE RECTANGULAR CUTOUT: 7.00WX2.00D, 3.02 FROM BOTTOM EDGE & HAS MARKINGS: "FWD" NEAR UPPER LEFT CORNER & "UP" & "INBD" ON 2 LINES NEAR UPPER RIGHT ONE & PART NUMBER NEAR LOWER RIGHT CORNER; FAR SIDE: TOP SURFACE CURVES FROM 6.72 INCHES THICK AT BOTTOM EDGE TO 2.50 AT TOP WITH RADIUS OR 40.25 INCHES |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950825-73 | 26512 |
| 160D950825-73 | 3J310 |
| 160D950825-73 | 79RG9 |