NSN 9330-01-502-3055 · NIIN 015023055 · FSC 9330
NO DASHES 9330015023055
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 17.750 |
| ABNM | THICKNESS | INCHES NOMINAL 6.720 |
| ABRY | LENGTH | INCHES NOMINAL 21.820 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | ROUGHLY RECTANGULAR; LEFT/SHORT EDGE TAPERS 1.00 AT BOTTOM EDGE; BOTTOM EDGE HAS CUTOUT: 15.20WX1.00H, 5.62 FROM LEFT/TAPERED EDGE; TOP SURFACE CURVES WITH RADIUS OF 40.25 FROM THICKNESS OF 6.72 ALONG BOTTOM EDGE TO 2.50 ALONG TOP EDGE; THERE ARE 2 PARALLEL, SLANTED STRAIGHT LINE CUTOUTS ALONG LEFT EDGE: 1.75WX0.50H, 1.25 INCHES FROM TOP EDGE, SLANTING 15 DEGREES TOWARD TOP SURFACE & TOWARD BOTTOM EDGE & ONE 8.00 INCHES FROM TOP EDGE; FAR SIDE IS MARKED: "UP" & "INBD" ON 2 LINES NEAR CENTER TOP, "FWD" TO RIGHT (FAR SIDE UP) & PART NUMBER IN LOWER LEFT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950825-75 | 26512 |
| 160D950825-75 | 3J310 |
| 160D950825-75 | 79RG9 |