NSN 9330-01-502-3379 · NIIN 015023379 · FSC 9330
NO DASHES 9330015023379
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 11.890 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 38.620 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH LONG SIDES HORIZONTAL: CIRCULAR CUTOUT IN CENTER WITH DIAMETER OF 3.75, CENTERED 18.52 FROM LEFT & 6.84 FROM TOP WITH LINE CUT THRU TO BOTTOM OF ITEM, 18.52 FROM BOTTOM; CUTOUT IS SLANTED FROM NEAR SURFACE TO FAR SURFACE SO THAT CENTER ON FAR SIDE IS 19.31 FROM LEFT EDGE & 7.20 FROM TOP; A RECTANGULAR CUTOUT STRAIGHT THRU: 6.00WX2.00H, 29.24 FROM LEFT & 3.50 FROM TOP; NEAR SIDE IS MARKED "FWD" & "UP" IN UPPER RIGHT CORNER & WITH PART NUMBER IN LOWER RIGHT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950825-37 | 26512 |
| 160D950825-37 | 3J310 |
| 160D950825-37 | 79RG9 |