NSN 9330-01-502-3446 · NIIN 015023446 · FSC 9330
NO DASHES 9330015023446
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 20.810 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 38.150 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH LONG SIDES HORIZONTAL: HAS IRREGULARLY SHAPED CUTOUT ON TOP EDGE (ROUGHLY SEMICIRCULAR WITH "FINGER" AT LOWER RIGHT): BEGINNING 2.04 FROM RIGHT EDGE AND EXTENDING 28.78 TO LEFT & 9.00 DOWN AT FARTHEST POINT OF CIRCULAR PART WITH FINGER EXTENDING AT 30 DEGREE ANGLE TOWARD LOWER RIGHT & ENDING IN CIRCLE WITH DIAMETER OF 1.00 CENTERED 2.10 FROM RIGHT EDGE & 13.68 FROM TOP; NEAR SIDE IS MARKED WITH PART NUMBER NEAR CENTER OF BOTTOM EDGE & WITH "FWD" & "UP" CROSSWISE NEAR CENTER OF LEFT EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950825-55 | 26512 |
| 160D950825-55 | 3J310 |
| 160D950825-55 | 79RG9 |