NSN 9330-01-502-3738 · NIIN 015023738 · FSC 9330
NO DASHES 9330015023738
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 25.440 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 27.680 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGLE WITH BOTH UPPER CORNERS CUT OFF AT 30 DEGREE ANGLE, 17.32 INCHES FROM BOTTOM EDGE & WITH OVAL CUTOUTS ON BOTH CUTOFF EDGES WITH RADIUS OF 2.50 INCHES, CENTERED 20.00 FROM BOTTOM, ON CUT EDGESENDING WITH CURVE WITH SAME RADIUS CENTERED 7.00 UP THE CUTOFF EDGES; 3 CUTOUTS: CIRCLE WITH RADIUS OF 1.00, CENTERED 1.92 FROM RIGHT & 4.08 FROM BOTTOM, KIDNEY SHAPE WITH LOWER RADIUS 1.00, CENTERED 2.10 FROM RIGHT & 7.68 FROM BOTTOM & UPPER RADIUS 1.75, CENTERED 2.72 FROM RIGHT & 10.18 FROM BOTTOM, AND SOMEWHAT OVAL SHAPE, LOWER ARC WITH 1.75 RADIUS, CENTERED 17.08 FROM RIGHT & 3.23 UP, UPPER RIGHT ARC, RADIUS 1.75, 20.72 FROM RIGHT & 11.28 FROM BOTTOM, UPPER LEFT ARC, 1.75 RADIUS, 22.72 FROM RIGHT & 10.18 FROM BOTTOM, & "BUMP" ON LEFT EDGE WITH RADIUS OF 0.50, 23.52 FROM RIGHT & 7.63 FROM BOTTOM; NEAR SIDE IS MARKED: "UP" & "AFT" ON 2 LINES NEAR CENTER TOP WITH PART NUMBER CENTERED BELOW; FAR SIDE HAS "UP" & "FWD" ON 2 LINES IN UPPER CENTER RIGHT AREA |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950825-43 | 26512 |
| 160D950825-43 | 3J310 |
| 160D950825-43 | 79RG9 |